Welcome to Motley Mama — honest takes on motherhood, marriage & family.

Make your own all-purpose cleaner

How to make your own all-purpose cleaner with ingredients you already have is less complicated than the cleaning aisle suggests. In our house, the bottle that earns a permanent place is not a complicated concentrate; it is a simple vinegar-and-soap spray for fingerprints, sticky table ledges, splash marks and the daily traffic of a family kitchen. The aim is not to pretend one mixture disinfects every corner or strips every stain. It is to make ordinary wiping-down quicker, kinder to the budget and easy to keep doing.

Australian supermarkets make the starting point easy. Woolworths and Coles usually stock plain white vinegar and bicarb soda in the cooking aisles, and a stop at Bunnings can add spray bottles, buckets and other useful hardware. Shelf prices are in Australian dollars, measurements are in metric, and even a 500 mL bottle can cover plenty of jobs. I reckon the best homemade cleaner is the one you can mix without a special order, and that is exactly what this bottle is.

Start with the jobs your cleaner must do

Treat “all-purpose” as a useful boundary rather than a magic claim. This spray suits routine cleaning of sealed benchtops, glossy splashbacks, glass, stainless-steel taps, sealed timber and many vinyl or ceramic surfaces. It is good at lifting ordinary grime and soap film, provided you give it a moment to loosen the dirt. Dust first with a dry cloth, then use the spray only where the surface needs moisture. That sequence stops a small clean from becoming a full flood.

Busy family homes need a product that can handle repeat use without turning the sink into a science project. Children leave sticky hands on the table, lunchboxes land beside the fruit bowl and pasta sauce appears while dinner is still on the stove. A quick spray, a brief wait and a wipe with a clean cloth deals with the day-to-day film. For a deeper stain, a little more technique beats a stronger chemical or a frantic application of three products at once.

Before adapting the recipe, check the surface and the bottle in front of you. If a question keeps circling, Motley Mama’s reader questions page offers a useful place to clarify it before mixing, while a patch test on a hidden corner takes less effort than repairing a dull finish. This is also where honesty matters: a homemade spray may clean beautifully, but it does not carry the specific, tested claims of a registered disinfectant.

Choose ingredients that work together

Vinegar supplies the acid that helps loosen grease and mineral film, while a small amount of dish soap lets water hold the loosened dirt in suspension so the cloth can carry it away. Plain water is the carrier, and it should make up the largest part of the bottle. Use white vinegar rather than balsamic or wine vinegar, whose colour and smell can linger on a benchtop. Cider vinegar is edible but not the best choice for a spray bottle; white vinegar is inexpensive, neutral-smelling and predictable.

Aussie recipes often call for bicarb soda, the name you will see on many Coles and Woolworths baking aisles and on packets labelled baking soda. Keep it nearby as a gentle abrasive for sinks, but do not expect vinegar and bicarb soda to become a stronger cleaner when combined. Their acid and base reactions largely cancel each other out, and the fizz can create a false sense that more cleaning power is happening. Choose vinegar for the spray and use bicarb separately as a paste when you want mild scrubbing.

Water conditions can change the finish. Adelaide water can leave visible limescale around taps and glassware, and humid summer weather in Brisbane can encourage a film on splashbacks and bins. A vinegar spray handles light film well; for stubborn scale, mix 15 g citric acid with 500 mL hot water, cool it and dilute it one-to-one with cool water. Use that solution only on compatible hard surfaces, and keep it away from marble, limestone, travertine and other acid-sensitive materials. Bicarbonate, vinegar and soap each have a job, but combining them is not automatically better.

Build a compact mixing kit

For a standard batch, use a 750 mL spray bottle and mix the liquid in a jug first. That gives you room to swirl the ingredients and avoids a foamy bottle while the soap is added. Have the ingredients ready, then measure them in the order below.

For the cleaner

For applying it

The dish soap is the surfactant that makes the mixture work across greasy surfaces, so a teaspoon is enough for this quantity. Excess soap can leave a dull film, especially when the water in your area is hard. Unscented liquid castile soap is another option if you already have it, but check the bottle’s dilution because concentrated and ready-to-use products differ. Avoid laundry detergent and anything that leaves a scented or oily film, and skip any “tough cleaner” that contains bleach.

If your household only wants a small batch, halve every amount and use a 375 mL bottle. A funnel makes the transfer neater, and an old bottle can work if it is washed thoroughly, has a working trigger and has never held bleach or another strong chemical. Label the mixture as soon as it is made. Include the date, the main ingredients and a clear warning that it is a cleaning product, not a drink. A second bottle filled from the first batch is useful, but do not keep refilling an old bottle without cleaning it.

Mix, apply and give it time

Pour the water into the jug, add the vinegar and stir gently before introducing the dish soap. Swirl the sealed spray bottle until the ingredients combine, then label it with the date and a simple use-by note. A bottle made today should be discarded after about 30 days, or sooner if it smells different, develops cloudy patches or has been left in a hot car. If you want a visual checklist before you begin, these practical household reminders are a quick reference for gathering what you need.

For most marks, spray the surface, leave it for two to five minutes and wipe with a damp microfiber cloth. Use a dry cloth for the final pass on glass and stainless steel, where moisture left behind can show as streaks. For a sticky patch, work the cloth across it rather than scrubbing hard. For a limescale ring, let the acid sit a little longer, then rinse where the surface allows. On floors, use a well-diluted solution on a damp mop and check the finish first, especially on vinyl that may already carry a polish or wax layer.

The important safety habit is keeping this mixture away from products that should never share a bucket or spray bottle. Never mix vinegar with bleach, hydrogen peroxide, ammonia or drain cleaner; some combinations release irritating or toxic gases, and “natural” does not mean safe to combine with everything. Use gloves if your skin is sensitive, open a window while spraying and keep the bottle away from children and pets. Avoid natural stone, unsealed wood, brass, aluminium, screens and any surface that the manufacturer says is incompatible with acid. When in doubt, test a small hidden patch.

Store it wisely and keep the habit light

Keep the bottle in a cool, dark cupboard rather than on a sunny windowsill or a hot verandah shelf. Australian summers can raise the temperature inside a garage quickly, and heat makes the fragrance stronger and can degrade the plastic trigger over time. Keep it beside the sink if that encourages use, but not within reach of a curious toddler. Wipe the nozzle with a damp cloth occasionally, because a sticky spray head often means residue has built up around the opening. Use the cleaner within 30 days and wash the empty bottle before recycling or repurposing it.

Cleaning and disinfecting are separate jobs. This spray is for removing ordinary dirt, grease and soap residue; it should not be used on a bathroom when someone is unwell unless the product carries a suitable registered disinfectant claim and you follow its directions and contact time. For raw-meat surfaces, toilets, sanitary bins or a child’s illness clean, choose an appropriate product and follow its label. Honest labelling makes a homemade solution more useful because everyone in the household knows exactly what it is for.

The lasting benefit is a routine light enough to repeat, rather than a showroom-standard home that only looks clean on cleaning day. A bottle within reach, two cloths and a forgiving family rhythm make everyday messes feel manageable. On a night when sleep has been patchy, it is sensible to leave the mixing for later and follow a gentle morning routine instead. Caring for a home can be a quiet act of stewardship: practical, unglamorous and repeated often enough to become a habit.